韩国昌汉小型平面磨床CGM-250B产品特点:
■工作台导轨上采用特殊钢材质(SKH-9)
■精密主轴采用P4级轴承
■铸件采用调质的高级材质的合金铸件、高耐磨、热膨胀率低
■强韧的机体结构
■工作台驱动采用了同步带、提高使用寿命
■采用密封式V3级主轴马达、低震动、无噪音
■采用自动润滑装置、完美的防漏油
■设有上下微调进给装置、更便于精密加工
■安全性极好的控制系统
高精密砂轮修整器
防污染的过滤纸式冷却装置(选配)
刮研技术维持精密度
Using special steel for table slide. (SKH-9)
Precise spindle of cartridge type is used P4-bearing.
Minimize to thermal expansion and wear,cast-iron of high material that has
High rigid structure.
In table driving,life of semi-permanent as used timing belt and wire.
Spindle motor of closing V3,low vibration,no noise,natural coolant.
Auto lubrication unit and complete prevention of oil leaking.
Easy of precision work as adherence up and down micro feed unit.
Excellent control for security of interlock method.
Head dresser is secured high surface rough.
Cutting oil unit of paper filter is avoided pollution of cutting oil. (Option)
Maintain the best precision as distinguished scrapping.
韩国昌汉小型平面磨床CGM-250B产品型号:
型号 | MODEL | 200B | 200BS | |
工作台面积 | Table clamping surface | 150x | 440mm | |
移动距高 | Maximum travel(XxY) | 210x | 80mm | |
电磁吸盘大小 | Magnet chuck | 150x400mm | ||
主轴中心距到工作台上面距离 | Max.distance between spindle center and table | 450mm | ||
工作台 Table | 左右一次进给量 | X-Axis Traverse volume per revolution | 115~120mm | |
前后手动进给(一刻度) | Cross feed handle wheel (Graduation) | 0.02mm | ||
前后手动进给(一圈) | Cross feed handle wheel(Revolution) | 5mm | ||
上下 Head | 上下手动进给(一刻度) | Down feed handle wheel (Graduation) | 0.01mm | |
上下手动进给(一圈) | Down feed handle wheell(Revolution) | 2mm | ||
微进给(一刻度) | Down feed micro feeder(Graduation) | 0.0005mm | ||
微进给(一圈) | Down feed micro feeder(Revolution) | 0.02mm | ||
主轴 Spindle | 砂轮尺寸 | Grinding wheel dimension | 0180x5~20tx031.75mm | |
主轴转速(50Hz) | 50Hz Revolutions per minute | 3000rpm | ||
主轴转速(60Hz) | 60Hz Revolutions per minute | 3600rpm | ||
主轴电机 | Spindle motor | 2Hpx2P | ||
总消耗电力 | Total walk power | 2.5Kw | ||
机器重量 | Machine net weight (approx.) | 1100kgf | ||
占地面积(左右·前后·上下) | Floor space(LxWxH) | 1810x1325x1750mm |
砂轮 | Wheel | 1片/1PC |
法兰 顶出螺栓 | Wheel flange Wheel extractor | 3个/3PCS 1个/1PC |
砂轮平衡棒 | Balance arbor | 1个/1PC |
垫铁 | Leveling block | 5个/5PCS |
地脚螺丝 | Leveling bolt | 5个/5PCS |
工作灯 工具及工具箱 | Work lamp Tool box set | 1个/1PC 1套/1SET |
使用说明书 Manual 1本/1VOL |