韩国昌汉小型平面磨床CGM-250A产品特点:
工作台采用双V型滑轨运动方式、保持高精密度
精密主轴采用P4级轴承
■铸件采用调质的高级材质的合金铸件、高耐磨、热膨胀率低
■强韧的机体结构
■ 液压系统可以完美的防止漏油
■采用密封式V3级主轴马达、低震动、无噪音
■采用自动润滑装置、完美的防漏油
■设有上下微调进给装置、更便于精密加工
安全性极好的控制系统
防污染的过滤纸式冷却装置(选配)
刮研技术维持精密度
It can maintain high accuracy because of double slide ways for table travel.
Precise spindle of cartridge type is used P4-bearing.
Minimize to thermal expansion and wear,cast-iron of high material that has been heat treatment.High rigid structure.
Perfect preventing system from oil leaking by improved hydraulic unit.
Spindle motor of closing V3, low vibration, no noise,natural coolant.
Auto lubrication unit and complete prevention of oil leaking.
Easy of precision work as adherence up and down auto feed unit.
Excellent control for security of interlock method.
Cutting oil unit of paper filter is avoided pollution of cutting oil. (Option)
Maintain the best precision as distinguished scrapping.
韩国昌汉小型平面磨床CGM-250A产品规格型号:
型号 | MODEL Table clamping surface | 250A | 250AH 200x520mm | 250AHD | |
工作台面积 | Maximum travel(XxY) | 240x560mm | |||
移动距离(左右x前后) | Magnet chuck | 200x450mm | |||
电磁吸盘大小 | Max. distance between spindle center and table | 450mm | |||
主轴中心距到工作台上面距离 | X-Axis Traverse speed range | 5~25m/min | |||
工作台 Table | 左右移动速度 | Cross feed handle wheel(Graduation) | 0.02mm | ||
前后手动进给(一刻度) | Cross feed handle wheel(Revolution) | 5mm | |||
前后手动进给(一圈) | Cross feed increment traverse volume | 0.03~10 | mm/step | ||
前后间歇进给速度 | Down feed handle wheel(Graduation) | 0.01mm | |||
上下 Head | 上下手动进给(一刻度) | Down feed handle wheel (Revolution) | 2mm | ||
上下手动进给(一圈) | Automatic feed per minimum traverse volume | 0.002mm | |||
上下自动一圈小切入量 | Automatic feed per maximum traverse volume | 0.02mm | |||
上下自动一圈切入量 | Grinding wheel dimension | 0180 | x5~20tx031 | .75mm | |
主轴 Spindle | 砂轮尺寸 | 50Hz Revolutions per minute | 3000rpm | ||
主轴转速(50Hz) | 60Hz Revolutions per minute | 3600rpm | |||
主轴转速(60Hz) | Spindle motor | 2Hpx2P | |||
主轴电机 | Hydraulic pump motor | 1Hpx6P | |||
液压油泵用电机 | Total walk power | 3Kw | |||
总消耗电力 | 机器重量占地面积(左右x前后x上下) | Machine net weight (approx.) | 1350Kgf |
韩国昌汉小型平面磨床CGM-250A产品配件:
砂轮 | Wheel | 1片/1PC | |
法兰 顶出螺栓 | Wheel flangeWheel extractor | 3个/3PCS 1个/1PC | |
砂轮平衡棒 | Balance arbor | 1个/1PC | |
垫铁 | Leveling block | 5个/5PCS | |
地脚螺丝 | Leveling bolt | 5个/5PCS | |
工作灯 工具及工具箱 | Work lamp Tool box set | 1个/1PC 1套/1SET | |
使用说明书 Manual 1本/1VOL |